This tutorial was very kindly written by Liz Plummer, our featured member this week.
The best base for printing is a slightly soft one. I do a lot of screenprinting, so I already have one made of a piece of wood covered with a couple of layers of thick fabric and a piece of wipe-clean plastic (not that I seem to wipe it clean very much as you can see from the photo!). But a piece of that foamy stuff you can buying for washing dishes would do as well, or even a folded newspaper.
Here are my printing materials â€“ one is some black plastic moulded with an interesting grid pattern, bubble wrap in two different sizes, and one of those polystyrene pizza bases. They are brilliant for creating texture, as you will see later.
You will need some paper or a pile of old envelopes (which is what I am using here). And some paint â€“ I used Golden acrylic paint because I already have it for my art but you could use poster paint or children’s paint. If you want to use the decorative papers for packaging, tags, or similar, acrylic paint is best because once it is dry, it won’t wash off or, more importantly, transfer to your products and stain them. Here I diluted some red Golden Fluid Acrylic paint with water (about 50:50) and painted it on to the bubble wrap with a sponge brush.
Then I placed the bubble wrap face down on to the envelope and rolled a soft brayer across it.
This is the result:
Here is some large bubble wrap being printed:
I then painted the same piece of bubble wrap with blue paint and printed that on top:
This is the pizza base from the above photo. I scored a grid pattern into it with the tip of an old pen, or you can use the end of a paintbrush or a similar object.
I painted the pizza base with blue and red paint and printed it:
You can use the pizza base to draw any design you wish. Here I am making a flower design with the end of a paint brush.
This is the result:
I painted this with green paint:
And printed it by pressing it down and, again, rolling it with a brayer. (This helps to transfer the paint to the paper).
Here I printed a great grid pattern using something I found in my husband’s DIY workroom! I’m not sure what it is meant to be used for, but it makes a great pattern!
And this is the moulded plastic which I have painted with red paint:
Great design, huh?
Here I added a bit of yellow paint to the red and painted it on in stripes (you’ll see the yellow has already mixed to make orange) and then overprinted it with the green pizza base leaf shape.
And these are the results!
When these are dry you can cut them up to make tags or use them in any way that you would use wrapping paper or commercially printed decorative paper.
There you go â€“ I hope that has given you just a few ideas for printing patterns on paper. There are loads of other possibilities and I’m sure you will come up with tons of imaginative ones.
103 total views, 10 views today